new Easy installation
The new Billi Quadra Dual-Temp Dispenser
features a unique dispenser top-mounting system,
making it a plumber’s dream to install. The ‘snap-fit’
base is secured into the mounting hole, pipework is fed
through from the top and the dispenser securely clips into
place.
Water supply
A single 15mm (1/2”) stop-tap with a male thread should be installed in an easily accessible position. Water supply must be microbiologically safe to drink, with a minimum dynamic water pressure of 250kPa.
Power supply
Most Quadra models require a standard 10 Amp power outlet. The Quadra 4100 model requires a 15 Amp power outlet while the Quadra 4180 model requires a 20 Amp outlet in the cupboard area where the unit is to be installed. All models are supplied with a 1 metre flex cord and plug.
Replacement filters
Periodic replacement
of filter cartridges is necessary to maintain water quality.
Genuine replacement Billi filter cartridges are available
from authorised Billi agents. Cartridges are also available
to suit the needs of different water supply areas. Optional
sub micron rated filters are NSF certified to safely remove
health threatening giardia and cryptosporidium.
Warranty
The Billi Quadra stainless
steel boiling water tank is covered by a 5 year pro rata
warranty. All other components are covered by a 12 month
warranty. Filter cartridges are not covered by warranty,
as water conditions and usage vary.
Certifications
Every Billi drinking water
appliance is manufactured under a certified quality control
system. The Billi Quadra has been tested
and complies with all required standards including: Watermark
Licence Number 21525; Tested to AS3498 and AS/NZS4020;
AS/NZS ISO 9001 Certificate Number QEC 11627; C-Tick approved;
Complies with AS1428 Requirements for Access for the Disabled.
 |
|
|
 |
 |
 |