Retail Promotion - Cashback. Filter. Installation.
Offer period1 September 2026 – 30 September 2026
Exclusive offer valid for purchases made from 1st September 2026 – 30th September 2026. Redemption period closes 31st October 2026, unless otherwise advised.
913100, 914000, 915000, 915100, 925101
By submitting your redemption claim, you agree to all T&C’s. Please refer to the full terms and conditions.
As part of your redemption claim submission, you will be required to provide your proof of purchase to confirm the product is eligible. This includes the date of purchase, the model & serial number purchased, and the eligible product that has been paid in full.
If you have any questions, please contact marketing@billi.com.au.

Applicable SKUs per Cashback
$300 Cashback:
Home BCS XL Levered Dispenser: 925101LCH, 925101LBR, 925101LMB, 925101LMW, 925101LUB, 925101LGM, 925101LSB
Home BCS with Multifunction Mixer: 925101GCH, 925101GBR, 925101GMB, 925101GMW, 925101GUB, 925101GGM, 925101GSB
B5000 Sparkling with XL Levered Dispenser: 915100LCH, 915100LBR, 915100LMB, 915100LMW, 915100LUB, 915100LGM, 915100LSB
B5000 Sparkling with Multifunction Mixer: 915100GCH, 915100GBR, 915100GMB, 915100GMW, 915100GUB, 915100GGM, 915100GSB
$250 Cashback:
Home BC with XL Levered or XT Touch Dispenser: 915000LCH, 915000LBR, 915000LMB, 915000LMW, 915000LUB, 915000LGM, 915000LSB, 915000TCH, 915000TBR, 915000TMB, 915000TMW
Home BC with Multifunction Mixer: 915000GCH, 915000GBR, 915000GMB, 915000GMW, 915000GUB, 915000GGM,915000GSB
$200 Cashback:
Home CS with Dual Slimline Lever Dispenser: 913100DCH, 913100DBR, 913100DMB
$150 Cashback:
Home BA with XL Levered or XT Touch Dispenser: 914000LCH, 914000LBR, 914000LMB, 914000LMW, 914000LUB, 914000LGM, 914000LSB, 914000TCH, 914000TBR, 914000TMB, 914000TMW
Home BA with Multifunction Mixer: 914000GCH, 914000GBR, 914000GMB, 914000GMW, 914000GUB, 914000GGM, 914000GSB
Choice of filter with all above SKUs: 5 Micron Filter – 994051or a 0.2 Micron Filter- 994052 (recommended).
Ensure you read and understand the promotion full terms and conditions before redeeming the offer.
Full Terms & Conditions are subject to change without notice.


FREE STANDARD INSTALLATION TERMS & CONDITIONS
For the purpose of this promotion, Standard Installation applies to any eligible Billi system defined in the General Promotion Terms and Conditions, provided the installation requirements below are met.
Standard Installation will be carried out at a residential premises by a Billi accredited technician and is not transferable to other tradespeople and/or redeemable for cash.
Installation Requirements
• Standard Installation requires sufficient power and plumbing supply to be in place before the agreed installation date.
• Billi technicians will not be able to perform additional plumbing or electrical works outside of the standard installation. Any additional works must be completed by qualified tradespeople prior to installation, at the customer’s expense.
• Please refer to the relevant product Installation Guide and Data Sheet for full requirements (https://www.billi.com.au/technical-documents).
• Billi’s Multifunction Mixer Tap requires both a hot and cold-water point/ isolation value. The Underbench system will require an additional cold-water point. Billi recommends the Underbench system to be installed with its own isolation valve, however this may not be required in all cases. This should be discussed with your qualified installer.
• Failure to prepare the site as required will result in a callout fee for any and each re-attendance required.
Benchtop & Stone Limitations
Standard Installation does not include cutting granite, stone, or benchtops thicker than 48mm.
Due to new silica safety regulations, Billi technicians cannot perform cutting works on any stone material. Customers are responsible for engaging a qualified stonemason at their own expense if such modifications are required.
Font installations are not included in this offer and will be at an additional cost.
Parts & Materials
If extra parts (such as extension kits, replacement valves, or connections) are required during installation, these will be supplied at the customer’s expense.
Locations & Timing
Bonus Standard Installation is available in metropolitan areas of Melbourne, Sydney, Newcastle, Brisbane, Gold Coast, Sunshine Coast, Canberra, Darwin, Perth, Adelaide, and Hobart.
Requests for installations outside these areas will be considered on a case-by-case basis.
Installation must be completed within 12 months of approved redemption and no later than 30th August 2027.
Installation Lead Times:
Typical lead times for most areas are 2–4 weeks, however these may vary and cannot be guaranteed.
Final Notes
Please ensure you read and understand these Installation Terms together with the General Promotion Terms before purchasing your Billi product and redeeming this offer.
For clarification, contact Billi on 1800 812 321 or email marketing@billi.com.au.